Call Toll Free 1 877 570-6961

Hitch mounted carrier - Wheelchair, Power Chair & Electric Scooter carriers & Lifts. Now with Solid Decks!

Now you can have the freedom to go anywhere you want, safely and easily, with this Mobility Scooter / Power Chair / Wheelchair Carrier system.

The Model #350ARV Mini Scooter Carrier holds up to 350 lbs. and carries smaller Travel Scooters, Power Chairs and Wheelchairs.

There's a hinging device located just behind the hitch. The hinging device has two positions. Each position uses a 5/8" pin.

The first position, the primary position, keeps the carrier locked in the horizontal position.

The second position will permit you to store the carrier in a vertical position.

The model 350ARV Mini mechanism allows the loaded Scooter Carrier to lift and float over dips and curbs. It also stores in a vertical position when not in use.

SPECIAL SAFETY FEATURES
The tilt feature eliminates the need for ramps. With the flip of a latch, the rack tilts easily toward the passenger side.

The deck extender pulls out from underneath the carrier reduces the angle of incline. It also reaches the curb for loading and unloading. This feature is especially helpful when a handicap curb ramp is not available.

All of the Tilt-A-Rack® models feature a hinging device located just behind the hitch., which has three positions. The first position keeps the rack locked in the horizontal position. The second position allows the loaded Scooter Carrier to lift and float over dips and curbs. The third position allows the empty rack to be folded into a vertical position for storage. Class II 1 1/4" hitch bars and an optional adjustable-height hitch bar (class II & III) are also available for low and smaller vehicles.

Tilt-A-Rack® Scooter Carriers are warranted to be free from defects in material and workmanship within one year from the date purchased by the consumer.

Specifications Chart

No More:

Features:

• Cramped trunk space
• Dealing with ramps
• Disassembly of Scooter or Chair
• Problems with non-handicap vehicles
• Cramped garage space, (carrier tilts up when not in use)
• Licensing, Extra lights & failing electrical components

• Aluminum construction
• Holds up to 350 lbs.
• Unit weight is 46 lbs.
• Usable platform area is 44" x 24"
• Deck extends up to 40" and tilts for easy loading
• 12" of maneuverable area from receiver to edge of carrier
• Requires a 2" class III or class II hitch
• May require an optional class II Height Adjuster depending on your vehicle.

How to use your 350ARV Mini - Click on Image For Larger Version
Some Pictures Show Older Versions

First you must Tilt your 350ARV Mini down level.

Next you must remove the end bar on the loading side.

Now you can extend the deck extender to the out position for loading.

There are 2 steps here before you can load your unit. First remove the safety pin located on the opposite side of the spring handle. Next pull on spring handle until it is fully extended. Finally rotate the handle up and place the handle on the side of the main deck.

Now you have the unit tilted to the passenger side you may load you scooter or powerchair!

Load your scooter or powerchair.

Repeat steps 2 & 3 after you unit is loaded and the spring handle has been moved back to the locked position.

Now you must tie your unit to the rack with tie down straps avaliable from ATV Solutions or your dealer.

= All prices are plus shipping and handling charge unless indicated by
Prices & Manufacturers specifications subject to change at any time