Call Toll Free 1 877 570-6961

Hitch mounted carrier - Wheelchair, Power Chair & Electric Scooter carriers & Lifts. Now with Solid Decks!

Also Available is the 500SRV Economical Steel Unit 48" x 28"

The Tilt-A-RackŪ Mobility Scooter Carrier's - 3 easy steps to independence:
1. - Tilt the rack
2. - Load the Scooter - It automatically Levels
3. - Secure and GO!

#0209 700ARV $899.99  
Category IV+ Capacity 700 lbs (72" x 49" - Weight: 119 lbs)
Note: Must have a 3/4 ton or larger vehicle with correct TW rated hitch
Click For Details - Specifications Chart

#0206 500 ARV $749.99
Accommodates full-sized Mobility Scooters and Power Chairs
Holds up to 500 lbs. - Weight 85 lbs
Usable platform area is 60" x 32"
Click For Details - Specifications Chart

#0530 500 ARV Plus $895.99
Holds up to 500 lbs. - Weight 105 lbs
Usable platform area is 63" x 38"
Click For Details - Specifications Chart

#0207 350 ARV $649.99
Carries most mid-sized Mobility Scooters and Power Chairs
Holds up to 350 lbs. - Weight 62 lbs.
Usable platform area is 52" x 26"
Click For Details - Specifications Chart

#0115 350 ARV Mini $579.99
Perfect for the small travel sccoters, power chairs and wheelchairs.
Click For Details - Specifications Chart

SPECIAL SAFETY FEATURES
The tilt feature eliminates the need for ramps. With the flip of a latch, the rack tilts easily toward the passenger side.

The deck extender pulls out from underneath the carrier reduces the angle of incline. It also reaches the curb for loading and unloading. This feature is especially helpful when a handicap curb ramp is not available.

All of the Tilt-A-Rack® models feature a hinging device located just behind the hitch., which has three positions. The first position keeps the rack locked in the horizontal position. The second position allows the loaded Scooter Carrier to lift and float over dips and curbs. The third position allows the empty rack to be folded into a vertical position for storage. Class II 1 1/4" hitch bars and an optional adjustable-height hitch bar (class II & III) are also available for low and smaller vehicles.

Tilt-A-Rack® Scooter Carriers are warranted to be free from defects in material and workmanship within one year from the date purchased by the consumer.

Tilt-a-Rack Mobility Scooter Carrier Features:

• Tilt-a-Rack® Scooter Carrier is easy to install and use. There are no electronic components that might fail. Operates by a natural force-gravity! Those who can operate an electric lift and drive can also use this carrier with ease. Gravity and balance work for you!
• The leveling bolt on the frame beneath the platform keeps the carrier level for each type of vehicle and levels the center of gravity of the many types of chairs and scooters.
• The tilt feature eliminates the need for ramps. With the flip of a latch, the rack tilts easily toward the passenger side. It conveniently reaches the curb for parallel parking.
• The deck extender pulls out from beneath the scooter, reducing the angle of incline. This feature is especially helpful when a handicap curb is not available.
• The two set bolts eliminate the minute movement of the hitch bar when inside the hitch receiver. They are tightened to the face of the receiver immediately after you attach the carrier to your vehicle.

= All prices are plus shipping and handling charge unless indicated by
Prices & Manufacturers specifications subject to change at any time